Thursday, April 4, 2013

Ultrasonic Excellence For Your Wine or Cigar Storage

Ultrasonic 2000 Humidifier System

Ultrasonic 2000 Humidifier System
Capacity**: Volumes up to 2000 CUBIC feet* (length x width x HEIGHT)***
Many factors influence the capacity you'll need. PLEASE READ NOTES BELOW **
Type: Ultrasonic humidifier (with Habitat Monitor ® Control & Power Supply)
Model: HM-2000-US Stulz Ultrasonic humidifiers
Dimensions: 14.3" W x 10" H x 7.9" D
Output Rating: 12.7 gallons/ day of ultra-fine mist
Includes connection for 1/4 inch diameter water line
Reverse osmosis filter required
        
Additional Product Information
Ultrasonic Humidification
Ultrasonics provide the ultimate in clean, quiet, energy efficient humidity generation. Plumes of cool, microscopic droplets are rapidly evaporated, providing high moisture output from a small unit. These humidifiers are wall or ceiling-mounted, with direct line connection to a reverse osmosis water filter. The calibrated Habitat Monitor® digital electronic humidistat tightly controls humidity at the user programmable set point level.
System Features
• Includes the Habitat Monitor ®, preset for your use (See full description of features and specifications.)
• Humidifier control set point is easily programmed by user
• Humidity (and temperature) continuously measured and displayed
• Humidity controlled to within 1% (+ or -) of set point
• On board alarms for high and low humidity (and temperature)
• Alarm to indicate empty reservoir or possible malfunction if humidifier runs continually for 2 hours
* Measure your space. CUBIC (not square) feet= length x width x HEIGHT.

** ACTUAL capacity depends on:
1) VOLUME of room (multiply LENGTH x WIDTH x HEIGHT --- MUST include HEIGHT!!) (CUBIC feet NOT square feet)
2) Ambient climate (desert or mountainous regions require higher capacity units)
3) Room construction (open or poorly sealed spaces require higher capacity units)
4) Is there heat or a/c? (the introduction of hot or cold dry air requires higher capacity units)
*** VOLUME = Cubic feet= length x width x HEIGHT (NOT square feet) Measure your space. Be sure to multiply by the height also.

No comments:

Post a Comment